Back to blog
Staffing & Workforce

Mitigating Ergonomic Hazards in Ontario Care Home Laundry Workflows

November 20, 20266 min read

Behind the daily hum of an Ontario long-term care or retirement community lies an intensely physical reality that leadership rarely observes in full detail. Every shift, environmental services (EVS) and laundry personnel handle hundreds of kilograms of linens, personal garments, and barrier pads. Staff repeatedly reach deep into commercial washer-extractors, hoist water-saturated textiles into high-capacity dryers, bend over folding counters for hours, and navigate heavy bins across floor transitions. In a sector grappling with chronic labour shortages and tight operational budgets, musculoskeletal disorders (MSDs) from these repetitive, high-force tasks are a primary driver of lost-time claims, modified-work assignments, and staff turnover.

The High Cost of Repetitive Strain in Support Services

When healthcare administrators evaluate workplace injuries, direct resident transfers understandably command the most clinical attention. However, data from Ontario's Workplace Safety and Insurance Board (WSIB) consistently highlights that material handling in dietary, housekeeping, and laundry departments contributes substantially to lost-time injury rates in healthcare and social assistance. Unlike a sudden fall or acute resident transfer incident, ergonomic damage in laundry operations accumulates over months and years of micro-trauma.

The biomechanics of institutional linen management present distinct ergonomic hazards. Wet cotton textiles carry significant density; pulling a tangled, water-heavy sheet from the back of an industrial drum requires high grip force combined with spinal flexion and lateral twisting. Repetitive folding routines place prolonged static loads on the neck, shoulders, and wrists. When workers sustain soft-tissue strains, the financial consequences go beyond direct WSIB premiums. Operators must manage schedule gaps, bring in costly overtime or agency backfill, and endure the administrative friction of coordinating return-to-work programmes.

Moreover, when laundry staffing is depleted by injury, the ripple effect reaches resident home areas. Personal support workers (PSWs) frequently end up absorbing utility runs or sorting tasks to prevent care delays, pulling hands away from bedside commitments and increasing physical fatigue across the broader team.

Regulatory Scrutiny and Joint Health and Safety Responsibilities

In Ontario, employer obligations regarding physical hazards fall squarely under the Occupational Health and Safety Act (OHSA). Inspectors from the Ministry of Labour, Immigration, Training and Skills Development (MLITSD) routinely conduct targeted compliance blitzes in long-term care and retirement settings, with ergonomics and manual material handling remaining top inspection priorities.

Inspectors assess whether employers have taken "every precaution reasonable in the circumstances for the protection of a worker." In a commercial laundry suite, this means demonstrating that the home has systematically evaluated repetitive strain risks and implemented controls. Joint Health and Safety Committees (JHSC) are expected to identify hazard patterns during regular workplace inspections, but back-of-house utility areas are sometimes reviewed superficially compared to clinical resident units.

Under the Fixing Long-Term Care Act, 2021, operational continuity is tied directly to staffing stability and resident care outcomes. When laundry output slows due to staffing shortages caused by preventable injuries, the home risks compliance infractions around linen supply adequacy and infection prevention and control (IPAC) timeliness.

Identifying the Highest-Risk Physical Bottlenecks

Addressing ergonomic hazards requires isolating the specific movement patterns that exceed recommended biomechanical thresholds. A thorough internal audit should examine four key workflow stages:

  • Unloading saturated wash wheels: Reaching forward into a deep horizontal drum while sustaining a trunk-flexed posture exposes the lumbar spine to severe shear forces. The physical effort required to dislodge tightly wound sheets from extraction cycles is among the highest-risk motions in the building.
  • Pushing and pulling mobile linen carts: Transporting multi-compartment laundry hampers or wire delivery carts down long corridors creates excessive push/pull initial forces, particularly over carpet-to-tile transitions, expansion joints, or threshold ramps.
  • Static standing during sorting and folding: Sorting soiled personal clothing and folding flatwork at fixed-height tables forces workers into sustained forward neck flexion and awkward upper-limb reaches, leading to chronic cervical and rotator cuff fatigue.
  • Overhead reaching into dryers: Transferring dry, bulky thermal blankets or bedspreads from elevated dryer drums places repetitive strain on shoulders and upper back musculature.

Engineering and Administrative Controls for Daily Workflows

Eliminating physical strain requires a balanced mix of environmental adjustments, equipment improvements, and administrative workflow structuring.

Engineering Controls and Facility Adjustments

Where physical infrastructure permits, homes should introduce equipment that brings the work to the worker rather than forcing the worker into awkward postures. Spring-loaded base inserts in soiled collection bins ensure that linens remain near waist height as the load empties, eliminating deep bending. Investing in height-adjustable folding tables allows operators of different heights to work with their elbows at an optimal 90-degree angle.

For transport pathways, routine maintenance of cart castors is an inexpensive but critical intervention. Hair, lint, and thread frequently wrap around axles, multiplying the push force required to roll carts across resident home areas. Replacing worn, small-diameter wheels with larger polyurethane castors substantially lowers initial push force and reduces corridor rolling resistance.

Administrative Rotations and Standardized Bin Limits

Administrative measures can immediately redistribute physical burdens without significant capital outlay. A strict task-rotation policy ensures that no single worker spends an entire eight-hour shift performing high-repetition folding or intensive washer extraction. Alternating between sorting, washing, folding, and delivery spreads biomechanical stress across different muscle groups.

Clear capacity limits are equally vital. Laundry bins should feature visible "fill-to" indicator lines to prevent staff from overfilling containers to save delivery trips. Creating standard operating procedures that cap bin weights ensures carts remain within acceptable pushing thresholds as defined by standard occupational health guidelines.

Augmenting Physical Capacity with Automation

While ergonomic tools and schedule rotations mitigate risk, they do not remove the fundamental reality of senior living textiles: millions of pounds of laundry must be physically manipulated every year. In an aging healthcare workforce, the cumulative load remains an operational vulnerability.

To bridge this gap, progressive operators are exploring automation that directly absorbs repetitive mechanical labour. Emerging solutions, including Zleni's autonomous robotic systems, target the core ergonomic strain points of loading, unloading, sorting, and folding linens. By taking on the high-frequency physical manipulation of textiles, robotics can insulate human staff from the micro-strains that typically trigger WSIB claims.

This deployment model allows existing team members to step away from chronic heavy lifting and pivot toward higher-value infection control auditing, delicate resident wardrobe care, and responsive customer service on resident home areas. When physical tools handle the strain, staff retention improves and the risk of costly long-term disability claims drops.

What This Means for Operators

Protecting back-of-house staff from musculoskeletal injury is both a moral imperative and an operational shield. Administrators, DOCs, and environmental services managers can take tangible steps immediately:

  1. Conduct a dedicated laundry ergonomic audit: Walk the laundry workflow alongside your JHSC worker representative. Measure the force required to move carts across transition strips, observe drum-unloading postures, and evaluate table heights against the physical profiles of current staff.
  2. Audit cart running gear: Establish a scheduled maintenance cycle for hamper and delivery cart wheels to clear tangled lint and replace degraded castors that drive up manual push forces.
  3. Enforce task-rotation schedules: Formalize daily shift patterns that prevent continuous hours of static sorting or repetitive manual folding.
  4. Evaluate non-capital automation strategies: Review how subscription-based robotic models, such as Zleni, can assume the repetitive manual handling of heavy flatwork, protecting staff health while insulating the home from staffing volatility.

In an environment where every staffing hour is critical to compliance and resident well-being, preserving the physical health of support teams is fundamental to maintaining a resilient care community.

Next step

See if a pilot fits your community.

No capex. One flat subscription. No maintenance burden either.

Request a pilot